RPR Eclipse Rover and Pro Hardware Kit
Expand your creativity with the RPR Eclipse Rover Eclipse Rover Pro Kit. This Kit has what you need so you can operate on flat surfaces, as well as pipes, cables and other ridged surfaces. This kit includes: 1-RPR Eclipse Rover with Eclipse Wheels, 3-Short Crank Stands, 3-Short Crank Stands, 2- End pipe hanger brackets, 2- End pipe hanger brackets, 1- Center pipe hanger bracket, 1-Cable Mounting Bracket Kit.
This Gimble Car kit is an exceptionally smooth and stable platform to move your equipment.
Included in this Kit
1-RPR Eclipse Rover with Eclipse Wheels
3-Short Crank Stands
2-End pipe hanger brackets
1-Center pipe hanger bracket
1-Cable Mounting Bracket Kit
RPR Eclipse Rover
Professional Modal
Step up to a professional Quality Eclipse Rover.
The Eclipse Rover RPR has heavy-duty parts throughout. Loads of torque and serious horse power are delivered by the 980KV Brushless motor, dual 11.1v LIPO batteries and a powerful 150A electronic speed controller.
The RPR is equipped with metal gears and heavy duty 4mm T6 aluminum chassis for long lasting durability. The Aluminum bodied oil filled shocks with HD springs, waterproof electronics and heavy duty suspension provide the necessary DNA for reliable control and performance. The mounting plate is powder coated 1/8” Aluminum with hole patterns that will work with all of the attachments offered on eclipserover.com.
Hardware for operating on Pipes
The three short crank stands allows you to quickly set up two sections of pipes to a height of approximately 4’. The Eclipse Wheels and Pipe Hardware are designed to operate on 1.5" outside diameter pipe. In most cases you can use off the shelf ten foot long pipes which are readily available at most hardware stores, electrician supply houses and fencing suppliers. These brackets can be mounted to trusses, ceilings, saw horses, saw horses and other solid surfaces. Because pipes are normally sold in 10' lengths you should plan on adding one center bracket every ten feet. Be sure to check out our crank stands and truss kits.
Hardware for operating on Cables
The cable mounting kit is designed to be versatile. The components allow you to adapt for mounting to a wide verity of anchors such as trees, trusses, post. The Kit includes two mounting bars, four back bars, four eye bolts four bolts with washers and nuts.