Everything you need to convert a 550 brushed or brushless system to a sensored system.
Includes one Tekin RX4 ESC (electronic speed controller) and one Tekin ROC 412 EP HD 1200 KV sensored motor.
Note: Buyer will be responsible for soldering the wires to the ESC and Motor.
Tekin’s RX4 Brushless Sensored ESC is designed to power your chassis past any obstacle. With massive power handling capabilities, a waterproof* design and all the customization features you’d expect from a Tekin ESC; the RX4 has you covered no matter the situation. Not only reliable, this ESC has a host of built in features like a High Voltage BEC, Drag Brake, Data Logging and the ability to run either Brushed
Tekin's Element Proof ROC412 HD 1200 KV motor offers protection from the elements, giving you the confidence and the power you need to tackle the trails without fear of water, mud or snow! Designed for heavier trail or rock racing rigs, the ROC412 HD delivers more torque and more power on demand, so you can maintain desired speed and input voltage, while the longer can delivers more torque than a standard size motor.
Using a 4-pole 12-slot motor design based off the award-winning T8 Series motors, the ROC412 HD harnesses the benefits of brushless efficiency and extreme amounts of torque to stay out on the trail longer with more power on tap. And when you combine the ROC412 HD with an RX4 Speed Control, you have one of the smoothest and most capable brushless crawling systems on the market.
Element Proof design tackles Water, Mud and Snow*
18.5mm Rotor provides more Torque and Braking Power
5mm High-Strength Pinion Shaft
550 Length Can provides improved heat dissipation
4 Pole 12 Slot Crawler Motor Design
CNC Machined 6061 T6 Billet Aluminum Heatsink Can
Crawler, Rock Race and Trail Rig Specific
Neodymium Sintered Magnets
High Purity Copper Windings Maximizes Efficiency
Precision Engineered for Maximum Energy Conversion
Dual-Plug Sensor Wire Harness for use with all sensored and sensorless systems
High RPM ABEC5 Oversized Bearings
Element Proof ESCs and Motors are specially designed to withstand water splashes and are not meant to be submerged. Included dielectric grease must be used on the sensor and fan port connections to protect them from shorting.
The ROC412 HD is not intended for operation while submerged in liquid.
Anytime your motor sees water it is important that you perform the proper after run maintenance. Warranty does not cover neglect, lack of maintenance, bearings, rust or any damage that may occur if the motor is submerged in water.
Input Voltage: 3S
Weight: 221g / 7.8oz
Shaft Dimensions: 5mm x 15.3mm / .196" x .60"
Motor Diameter: 36mm / 1.41"
Motor Length: 62.5mm / 2.5"
Bearing Dimensions: Front: 5 x 14 x 5mm / Rear: 5 x 11 x 5mm